Plus Metals

Experience The Metals Strength


  • Aluminium Alloy 7075 T3511

    Aluminium Alloy 7075 T3511 Manufacturer | Aluminium Alloy 7075 T3511 In Mumbai

    Plus Metals offers Aluminium Alloy 7075 T3511 products designed for the aerospace and high-strength market, Commercial and structural application. Our expert team stringently checks these products on quality parameters to ensure flawless product range.

    aluminium alloy 7075 t3511

    Studied by rust proof sturdy constructive, high tensile strength , durability, industry approved design. Aluminium Alloy 7075 T3511 has a splendid quality to weight extent and a highly resistant to errosion. These exceptional attributes nearby its electrical and heat conductivity settle on it the consequence of choice for some modern applications. Aluminum sheet demonstrates incredible structure capacity and weld capacity furthermore a high calibre to-weight extent, heat conductivity and utilization resistance.


    The most common tempers for T6, T651, T73, T7351 aluminium are:

    Chemical Composition

    Weight % Si Fe Cu Mn Mg Cr Zn Ti Each Total
    Minimum     1.20   2.10 0.18 5.10      
    Maximum 0.40 0.50 2.00 0.30 2.90 0.28 6.10 0.20 0.05 0.15

    Mechanical Properties

    Temper Tensile Hardness
      Ultimate Yield Elongation Brinell
      KSI MPA KSI MPA %  
    T6, T651 83 572 73 503 11 150
    T73, T7351 73 503 63 434 13 N/A

    Supplied Forms

    Round Bar is stocked in the range 1/2inch to 12inch diameter


    Plate is stokced in thicknesses 1/2inch to 4 inch.


  • Specifications Of Aluminium Alloy 7075 T3511

    Aluminium Sheet and Coil

    Alloy

    AA1050, AA19000, AA2014, AA2024, AA6082, AA6061, AA3003, AA5083, AA5052, AA7075, AA7050

    Thickness (mm)

    0.5mm to 4mm for sheet and coil

    Width (mm)

    900, 1200, 1500, 2000, Customer specific width

    Length (mm)

    1200, 1800, 2400, 3000, Customer specific length

    Finish

    Mill


    Aluminium Plate

    Alloy

    AA1050, AA19000, AA2014, AA2024, AA6082, AA6061, AA3003, AA5083, AA5052, AA7075, AA7050

    Thickness (mm)

    4 to 300

    Width (mm)

    100 to 1524

    Length (mm)

    2400 to 12000, Customer specific length

    Finish

    Mill


    OUR SUMMARY:
    Review Date
    Reviewed Product
    Aluminium Alloy 7075 T3511
    Author Rating
    5

Products






Enquiry


Please Contact Us