• ALUMINIUM ALLOYS 2014 T651 HE 15 MANUFACTURER

    Aluminium Alloys 2014 T651 he 15 Supplier | Aluminium Alloys 2014 T651 he 15 Exporter in India | Aluminium Alloys 2014 T651 he 15 Manufacturer in Mumbai

    Due to its high strength, Alloy 2014 finds its application in Weapons manufacture, Aerospace Structure, military vehicles, bridges, and structural applications and so forth.Aluminium alloys 2014 T651 he 15 manufacturer is a copper based alloy with very high strength blended with excellent machining characteristics. Aluminium alloys 2014 T651 he 15 manufacturer is available in Bar, Sheet, Strip, Plate, Wire, Tube, Drawn Tube, Forging Stock and Rivet Stock. It is characterised by Heat treatable alloy, High mechanical strength slightly higher than 2011 and 2017A, High durability, resistance against corrosion, High strength, Excellent finish.

    Aluminium Alloys 2014 T651 He 15 Manufacturer

    Temper Types

    The most common tempers for L93 - 2014A aluminium are:

    • T4 - Solution heat treated and naturally aged to a substantially stable condition
    • T3 - Solution heat treated, cold worked and naturally aged
    • T6 - Solution heat treated and artificially aged
    • T6511 - Solution heat treated and stress-relieved by stretching then artificially aged with minor straightening after aging - Equivalent to T4 condition
    • T651 - Solution heat treated, stress relieved by stretching then artificially aged

    Aluminium & its Alloys are viewed as a standout amongst the most practical of metals for an ample of reasons

    Not suggested for fusion welding. It is utilized for high quality parts as a part of airplane and hardware, including apparatuses and jolts and for security vans where quality ids basic. It tends to permit the removal of a more prominent volume of metal in a single operation for a equipment standard of completion than 6082.

    Durability is lower and hence, needs a security covering. Machines preferable in solution treated condition over completely heat treated and utilized for machined parts where these qualities are basic.


  • Chemical Element of Aluminium Alloys 2014 T651 He 15

    Chemical Element

    % Present

    Silicon (Si)

    0.50 - 0.90

    Iron (Fe)

    0.0 - 0.50

    Copper (Cu)

    3.90 - 5.00

    Zinc (Zn)

    0.0 - 0.25

    Manganese (Mn)

    0.40 - 1.20

    Magnesium (Mg)

    0.20 - 0.80

    Titanium (Ti)

    0.0 - 0.15

    Others (Total)

    0.0 - 0.15

    Chromium (Cr)

    0.0 - 0.10

    Nickel (Ni)

    0.0 - 0.10

    Other (Each)

    0.0 - 0.05

    Titanium + Zirconium (Ti+Zr)

    0.0 - 0.20

    Aluminium (Al)

    Balance


    Physical Property of Aluminium Alloys 2014 T651 He 15

    Physical Property

    Value

    Density

    2800 g/cm³

    Melting Point

    640 °C

    Thermal Expansion

    22.8 x10^-6 /K

    Modulus of Elasticity

    73000 GPa

    Thermal Conductivity

    134 - 135 W/m.K

    Mechanical Properties of Aluminium Alloys 2014 T651 He 15

    Thickness (mm) Proof strength (Min) Tensile Strength (Min) Elongation % (Min)
    Over 6 up to & incl. 12.5 410 460 7
    Over 12.5 up to & incl. 25 410 460 6
    Over 25 up to & incl. 40 400 450 5
    Over 40up to & incl. 63 390 430 5
    Over 63 up to & incl. 90 390 430 4
    Over 90 up to & incl. 115 370 420 4
    Over 115 up to & incl.140 350 410 4

    OUR SUMMARY:
    Review Date
    Reviewed Product
    Aluminium Alloys 2014 T651 He 15 Manufacturer
    Author Rating
    5

Products






Enquiry


Please Contact Us